Hammer Crusher, Crushing Machine

Hammer Crusher Application:
Hammer crusher is suitable for mid-hard and (http://maplered.com) light erosive Material (http://g654.org) s, whose pressure resistance strength is no more than 100Mpa and (http://maplered.com) humidity lower than 15%, such as coal, salt, chalk, gypsum, blocks, limeStone (http://g603.net) , etc.

Hammer Crusher Operating Principle:
The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and (http://maplered.com) hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw Material (http://g654.org) s enter the crusher through the feed opening and (http://maplered.com) are stricken, impacted, cut and (http://maplered.com) ground by the high-speed hammer to small size. There is a screening plate under the rotor, so that Material (http://g654.org) s with size smaller than the screen mesh will be screened out and (http://maplered.com) others are left to be further hammered and (http://maplered.com) ground until reach the stand (http://maplered.com) ard size. The size of the final product can be adjusted by changing the screening plate. The gap between the rotors and (http://maplered.com) the screening plate can also be adjusted according to different requirement.

Hammer Crusher Specification:
 

Note: This specification is just for reference, any changes are subject to the products.